Pursuit 185SPR 1-Way 5-Button Remote Control
FCC ID: TBQT12-SS1W
MPN: 185SPR
Location: Cleveland, Ohio
Price:
$34.99
New Pursuit 185SPR 1-Way 5-Button Remote Control Transmitter
Original Pursuit 185SPR 5-button remote control transmitter. Are you looking for a replacement Pursuit remote control for your system or just need an additional remote control? Buy with confidence from Access 1 Alarm and Audio!
This remote control is from the original manufacturer ensuring that you are receiving a genuine product made for your system.
Made for the following Pursuit/Prestige TYPE 24 systems:
- APS596Z
- APS787Z
- APS997Z
- PE1BTWZ
- PE1BTWZ2
- PE1BZLR
- PE2LCDZ
- PE2LEDZ
- PE2RELCDZ
- PE5BZ
- PR1BTWZ
- PR1BXLR
- PR5BZ
- PR09976Z
Replaces or works with the following Pursuit/Prestige remotes:
- 181SP
- 185SP
- 181TWSP
- 185TWSP
- 181XPR
- 185SPR
- 181TWXPR
- 18LCDSP
- 18LCDRE
Please make sure you have a working control unit installed in the vehicle prior to ordering this remote control. Programming instructions are included in the package and will require accessing your valet/programming switch located on your antenna.
Programming
Standard Programming: This method is used to program additional or replacement transmitters. Before you begin, have all transmitters which are to operate the system at hand.
- Turn the ignition key to the on position.
- Press and release the valet/programming switch 3 times (Siren Chirps).
- Press the START Button of each transmitter you want programmed until you hear a chirp from the horn or siren.
- Turn the ignition switch off.
The above action programs the Lock, Unlock, Start/Trunk, and Option 1 buttons which are typical for most systems. For additional channel programming beyond the option 1 button, please reference your owners manual.
Please contact us if you have any questions.
Programming
Standard Programming: This method is used to program additional or replacement transmitters. Before you begin, have all transmitters which are to operate the system at hand.
- Turn the ignition key to the on position.
- Press and release the valet/programming switch 3 times (Siren Chirps).
- Press the START Button of each transmitter you want programmed until you hear a chirp from the horn or siren.
- Turn the ignition switch off.
The above action programs the Lock, Unlock, Start/Trunk, and Option 1 buttons which are typical for most systems. For additional channel programming beyond the option 1 button, please reference your owners manual.
Please contact us if you have any questions.
| Remote Control | |
|---|---|
| Battery Type | CR2032 |
| FCC ID | TBQT12-SS1W |
| Frequency | 900Mhz |
| Range | 1/2-MILE |
| 1-Way or 2-Way | 1-WAY |