Pursuit 185BPR 1-Way 5-Button Remote Control
MPN: 185BPR
Location: Cleveland, Ohio
Price:
$29.99
New Pursuit 185BPR 1-Way 5-Button Remote Control Transmitter
Original Pursuit 185BPR 5-button remote control transmitter. Are you looking for a replacement Pursuit remote control for your system or just need an additional remote control? Buy with confidence from Access 1 Alarm and Audio!
This remote control is from the original manufacturer ensuring that you are receiving a genuine product made for your system.
Made for the following Pursuit/Prestige TYPE 23 systems:
- APS25Z
- APS510Z
- APS57TM
- APS57Z
- APS901TM
- APS901TWE
- APS901Z
- PE1BZ
- PR1BZ
- PRO9056Z
- PRO9556Z
- PRO9644Z
Replaces or works with the following Pursuit/Prestige remotes:
- 181BP
- 181BPR
- 183BP
- 183BPR
- 185BP
- 185BPR
Please make sure you have a working control unit installed in the vehicle prior to ordering this remote control. Programming instructions are included in the package and will require accessing your valet/programming switch located on your antenna.
Programming
Standard Programming: This method is used to program additional or replacement transmitters. Before you begin, have all transmitters which are to operate the system at hand.
- Turn the ignition key to the on position.
- Press and release the valet/programming switch 3 times (Siren Chirps).
- Press the START Button of each transmitter you want programmed until you hear a chirp from the horn or siren.
- Turn the ignition switch off.
The above action programs the Lock, Unlock, Start/Trunk, and Option 1 buttons which are typical for most systems. For additional channel programming beyond the option 1 button, please reference your owners manual.
Please contact us if you have any questions.
Programming
Standard Programming: This method is used to program additional or replacement transmitters. Before you begin, have all transmitters which are to operate the system at hand.
- Turn the ignition key to the on position.
- Press and release the valet/programming switch 3 times (Siren Chirps).
- Press the START Button of each transmitter you want programmed until you hear a chirp from the horn or siren.
- Turn the ignition switch off.
The above action programs the Lock, Unlock, Start/Trunk, and Option 1 buttons which are typical for most systems. For additional channel programming beyond the option 1 button, please reference your owners manual.
Please contact us if you have any questions.
Remote Control | |
---|---|
Battery Type | CR2032 |
FCC ID | TBQT12-AM1W |
Frequency | 434Mhz |
Range | 1/4-MILE |
1-Way or 2-Way | 1-WAY |