Pursuit 171BPR 1-Way 1-Button Remote Control
FCC ID: ELVATNG
MPN: 171BPR
Location: Cleveland, Ohio
Price:
$26.99
New Pursuit 171BPR 1-Way 1-Button Remote Control Transmitter
Original Pursuit 171BPR 1-button remote control transmitter. Are you looking for a replacement Pursuit remote control for your system or just need an additional remote control? Buy with confidence from Access 1 Alarm and Audio!
This remote control is from the original manufacturer ensuring that you are receiving a genuine product made for your system.
Made for the following Pursuit/Prestige TYPE 20 systems:
- APS25E
- APS501E
- APS57E
- APS901E
- APSRS1Z
- APSRS3Z
- PR1B
- PR71B
- PRO9051Z
- PRO9056E
- PRO9556E
- PRO9644E
Replaces or works with the following Pursuit/Prestige remotes:
- 141BP
- 141BPR
- 143BP
- 143BPR
- 145BP
- 171BP
- 171BPR
- 173BP
Please make sure you have a working control unit installed in the vehicle prior to ordering this remote control. Programming instructions are included in the package and will require accessing your valet/programming switch located on your antenna.
Programming
Standard Programming: This method is used to program additional or replacement transmitters. Before you begin, have all transmitters which are to operate the system at hand.
- Turn the ignition key to the on position.
- Press and release the valet/programming switch 3 times (Siren Chirps).
- Press the START Button of each transmitter you want programmed until you hear a chirp from the horn or siren.
- Turn the ignition switch off.
The above action programs the Lock, Unlock, Start/Trunk, and Option 1 buttons which are typical for most systems. For additional channel programming beyond the option 1 button, please reference your owners manual.
Please contact us if you have any questions.
Programming
Standard Programming: This method is used to program additional or replacement transmitters. Before you begin, have all transmitters which are to operate the system at hand.
- Turn the ignition key to the on position.
- Press and release the valet/programming switch 3 times (Siren Chirps).
- Press the START Button of each transmitter you want programmed until you hear a chirp from the horn or siren.
- Turn the ignition switch off.
The above action programs the Lock, Unlock, Start/Trunk, and Option 1 buttons which are typical for most systems. For additional channel programming beyond the option 1 button, please reference your owners manual.
Please contact us if you have any questions.
| Remote Control | |
|---|---|
| Battery Type | CR2032 |
| FCC ID | ELVATNG |
| Frequency | 434Mhz |
| Range | 1/4-MILE |
| 1-Way or 2-Way | 1-WAY |