New Prestige 18LCDLOR 5-Button SST 2-Way LCD Remote Control With Companion 2-Way 18TWLOR LED Transmitter

Original Prestige 18LCDLOR 5-button SST 2-way 900Mhz LCD remote control with the companion LED 2-way transmitters. Are you looking for a replacement remote control for your system or just need an additional remote control? Buy with confidence from Access 1 Alarm and Audio!

These remote controls are from the original manufacturer ensuring that you are receiving a genuine product made for your system.

Made for the following Pursuit/Prestige TYPE 25 systems:

• APS997ZLR
• PE1M2LED
• PE1M2LCD

Replaces or works with the following Pursuit/Prestige remotes:

• 18TWLOR
• 185TWLOR
• 18LCDLOR

Please make sure you have a working control unit installed in the vehicle prior to ordering this remote control. Programming instructions are included in the package and will require accessing your valet/programming switch located on your antenna.

Programming

Standard Programming: This method is used to program additional or replacement transmitters. Before you begin, have all transmitters which are to operate the system at hand.

1. Turn the ignition key to the on position.
2. Press and release the valet/programming switch 3 times (Siren Chirps).
3. Press the Lock Button of each transmitter you want programmed until you hear a chirp from the horn or siren.
4. Turn the ignition switch off.

The above action programs the Lock, Unlock, Start/Trunk, and Option 1 buttons which are typical for most systems. For additional channel programming beyond the option 1 button, please reference your owners manual.

Please contact us if you have any questions.