ASDS-1554

Brand NEW AutoStart ASDS-1554 1-Way 1-Mile+ Range Remote Control Transmitter

Original Autostart Command Start ASDS-1554 5-button remote control transmitter for various Autostart and Command Start systems, see list below. Are you looking for a replacement Autostart remote control for your system or just need an additional remote control? Buy with confidence from Access 1 Alarm and Audio!.

Will work with the following AutoStart Command Start systems

• AS-RFD1554
• AS-RFD3520
• AS-RFD7506
• AS-2386TWS
• DS3
• DS3+
• DS4
• DS4*

Works with the following Remote Controls:

• ASDS-1554
• ASDS-3520
• ASDS-7505
• ASDS-7506

Programming:

• Press and hold the transmitter’s “AUX” button until the remote emits a long beep. Release the “AUX” button.
• Press and release the START button. The transmit LED will start to flash.
• The remote is now in Pairing mode for a maximum of 20 seconds.
• Turn ignition ON with the key.
• Press, release, then press and hold the Antenna button until the antenna LED flashes once. Release the button. The DS4+ system is now in Pairing mode.
• Press the transmitter’s LOCK button. The horn/siren will sound to indicate the system has learned the remote ID, then it will exit out of Pairing mode after a pairing attempt.
• If pairing fails, repeat step 1.
• Once pairing is complete, turn ignition OFF. The horn/siren will sound to confirm exiting.