hide

(216) 252-3000

   M-F 9-5 Sat 10-2 EST

0
http://schema.org/InStock

7347V Remote Control

7347V Remote Control

Brand: Viper
Product Code: 7347V
Stock: 2
UPC: 044476161544
FCC ID: EZS7347V
MPN: 7347V
Location: Cleveland, Ohio

Genuine Viper 7347V 4th Generation 2-Way LCD Remote Control with up to 1/4-mile range. Replaces select Viper 7345V, 7341V, 489V and compatible Python, Clifford, Automate and Avital remotes. $136.99 with FREE U.S. shipping.

Price: $136.99

- +

Genuine Viper 7347V 4th Generation 2-Way LCD Remote Control

The Viper 7347V is Viper's 4th-generation 2-way 5-button LCD replacement remote control for compatible Viper, Python, Clifford, Automate, Avital and Mesa remote-start and security systems.

The 7347V provides a newer-generation replacement for the Viper 7345V and several earlier compatible 2-way LCD remotes, with visual command confirmation, system-status feedback and up to a 1/4-mile rated operating range.

$136.99 FREE Shipping in the USA
4TH GENERATION Newer Viper LCD remote design
2-WAY LCD Visual command and system confirmation
434 MHz ASK 2-way communication
UP TO 1/4 MILE Maximum rated operating range

Viper 7347V Replacement & Upgrade Remote

The Viper 7347V is a brand-new genuine Viper remote control from the original manufacturer — not an aftermarket reproduction, used remote or reprogrammed return.

Its 2-way LCD display provides visual command confirmation and system-status information from compatible security and remote-start systems. The 7347V uses a replaceable CR2450 battery and operates on 434MHz ASK 2-Way.

Although the replacement remote carries the Viper name, compatible Directed systems were also sold under the Python, Clifford Matrix, Automate, Avital and Mesa brands.

7347V Replaces Earlier & Discontinued 2-Way LCD Remotes

The product being sold and shipped is the 4th Generation Viper 7347V. On compatible systems, it replaces select earlier remote-control models including:

VIPER 489V
7341V
7345V
PYTHON 489P
7341P
CLIFFORD 489X
489XD
7341X
7345X
AUTOMATE 7344A
AVITAL 7345L
7353L

Viper 7347V Specifications

Remote Type 2-Way 5-Button LCD
Operating Range Up to 1/4 Mile
Frequency 434MHz ASK 2-Way
Battery CR2450

FCC ID: EZS7347V   |   IC: 1513A-7347V

Viper 7347V System Compatibility

The Viper 7347V works with select Viper, Python, Clifford Matrix, Automate, Avital and Mesa security and remote-start systems using a compatible receiver / Control Center.

VIPER
  • 3305V
  • 3308V
  • 4305V
  • 5305V
  • 5308V
  • Responder 350
  • 5000
  • 5002
PYTHON
  • Responder 460
  • 3305P
  • 5305P
  • 900
  • 902
CLIFFORD MATRIX
  • Matrix 1X
  • Matrix 10.5
  • Matrix 12.5X
  • 3305X
  • Matrix 5305X
  • 5305
  • Matrix 5325X
AUTOMATE
  • 5305A
AVITAL
  • 3305L
  • 3308L
  • 5305
  • 5308L
MESA
  • 3307VM
  • 5307VM
IMPORTANT COMPATIBILITY INFORMATION:

If a Viper 7345V or 7347V previously operated your system, then you already know the Viper 7347V is compatible with that system.

If you are replacing one of the older remote models listed above, compatibility is determined by the actual Viper, Python, Clifford, Automate, Avital or Mesa security / remote-start system and receiver / Control Center installed in the vehicle.

Remote compatibility is not determined by the vehicle's year, make or model. Verify your original remote model and installed system before ordering if you are unsure of compatibility.

Genuine Viper Remote Controls From Access 1 Alarm & Audio Access 1 Alarm & Audio has served Cleveland and Northeast Ohio for over 20 years. We specialize in Viper and Directed security, remote-start and replacement remote-control systems.

Viper 7345V Remote Control Programming Instructions

The Viper 7345V must be paired to the security or remote-start system installed in the vehicle before it can be used.

The correct programming procedure depends on whether your installed system is a Security + Remote Start system or a Security Only system.

IMPORTANT — LOCATE YOUR PROGRAMMING BUTTON FIRST

Depending on the age and configuration of your system, the programming button may be located in one of two places:

  • Separate Valet / Program Switch: Older installations may have a separate small push-button switch hidden underneath the driver's side dashboard.
  • Control Center / Antenna: Other systems use the programming button incorporated into the windshield-mounted Control Center / Antenna.

Both buttons serve the same programming purpose in the routines below. Use whichever programming button is installed with your system.

SECURITY + REMOTE START SYSTEMS — 1 BUTTON PRESS
  1. Door: Open a vehicle door and leave it open.
  2. Key: Turn the ignition key to the ON position. Do not start the vehicle.
  3. Choose: Within five seconds, press and release the Valet / Program button or Control Center / Antenna button one time.
  4. Hold: Within five seconds, press the same programming button one more time and continue holding it. The LED will flash one time and the siren will chirp to confirm entry into remote programming. Do not release the button.
  5. Transmit: While continuing to hold the programming button, press the LOCK button on the Viper 7345V. The siren will chirp to confirm that the remote has been programmed.
  6. Release: Release the programming button and turn the ignition key to OFF.
SECURITY ONLY SYSTEMS — 7 BUTTON PRESSES
  1. Door: Open a vehicle door and leave it open.
  2. Key: Turn the ignition key to the ON position. Do not start the vehicle.
  3. Choose: Within five seconds, press and release the Valet / Program button or Control Center / Antenna button seven times.
  4. Hold: Press the same programming button one more time and continue holding it. The LED will flash seven times and the siren will chirp to confirm the selected programming channel. Do not release the button.
  5. Transmit: While continuing to hold the programming button, press the LOCK button on the Viper 7345V. The unit will chirp to confirm that the remote has been paired to the receiver.
  6. Release: Release the programming button and turn the ignition key to OFF.
NOTE: If the system does not enter programming mode, first verify that you are using the correct programming button for your installation. Some vehicles have the Valet / Program switch hidden underneath the dashboard, while others use the button on the windshield-mounted Control Center / Antenna.

Programming Complete

After programming is complete, turn the ignition OFF and test the Viper 7345V by locking and unlocking the system. A properly paired 2-way remote should provide confirmation from the compatible system.

Viper Remote Control Programming Video

Need additional help? Watch our remote-control programming video for a visual walkthrough of the pairing process.

WATCH PROGRAMMING VIDEO
There are no reviews for this product.
Write a review

Visit our shop

hide  10418 Lorain Ave Cleveland, OH 44111

hide Call: (216) 252-3000

hide info@access1alarm.com

Business Hours

hide Mon-Fri --------------------------- 9am - 5pm

hide Sat      ----------------------------- 10am - 3pm

hide Sun     ----------------------------- Closed

Connect With Us

Connect with us and stay up to date on new products and installations

   

Finishing Where The Factory Left Off

We are a full service mobile electronics retailer offering quality products and installations for all types of vehicles and employ the best technicians ensuring your system is installed correctly and safely.

Shopping Help

Our Company

Policies

Services

Copyright © 2026 Access 1 Alarm & Audio. All Rights Reserved.