The discontinued Clifford 7345X 2-Way LCD remote control has been replaced by the genuine Viper 7347V 4th Generation 2-Way LCD remote for compatible Clifford Matrix security and remote-start systems. $136.99 with FREE U.S. shipping.
Looking for a replacement for your discontinued Clifford 7345X 2-Way LCD remote control? The genuine Viper 7347V 4th Generation 2-Way LCD remote is the replacement solution for compatible Clifford Matrix security and remote-start systems.
Although the replacement carries the Viper name, Viper and Clifford are Directed brands. The 7347V uses the compatible Directed remote-control platform required by systems that support the Clifford 7345X.
Clifford and Viper security and remote-start products are part of the Directed product family, and compatible systems shared remote-control technology across several Directed brands.
Because the original Clifford 7345X has been discontinued, the newer Viper 7347V provides the replacement 2-way LCD remote for compatible Clifford systems. You do not need a remote with the Clifford name printed on it for a compatible Clifford system to recognize the replacement.
The remote you receive is a brand-new genuine Viper 7347V from the original manufacturer — not an aftermarket reproduction, used remote or reprogrammed return.
In addition to replacing the Clifford 7345X, the Viper 7347V can replace several earlier or discontinued 2-way LCD remote controls when used with a compatible system and receiver / Control Center:
Replacement Remote: Viper 7347V | FCC ID: EZS7347V | IC: 1513A-7347V
The Viper 7347V replacement works with select Viper, Python, Clifford Matrix, Automate, Avital and Mesa security and remote-start systems using a compatible receiver / Control Center.
If a Clifford 7345X previously operated your system, the Viper 7347V is the replacement remote offered on this page.
If you are purchasing the 7347V to replace a different remote model, compatibility is determined by the actual security / remote-start system and receiver / Control Center installed in the vehicle.
Remote-control compatibility is not determined by the vehicle's year, make or model. Verify your original remote model and installed system if you are unsure before ordering.
The Viper 7345V must be paired to the security or remote-start system installed in the vehicle before it can be used.
The correct programming procedure depends on whether your installed system is a Security + Remote Start system or a Security Only system.
After programming is complete, turn the ignition OFF and test the Viper 7345V by locking and unlocking the system. A properly paired 2-way remote should provide confirmation from the compatible system.
Need additional help? Watch our remote-control programming video for a visual walkthrough of the pairing process.
WATCH PROGRAMMING VIDEO| Remote Control | |
|---|---|
| Works With Antenna(s) | 548T, 6213T, 6214T, A6214T |
| Battery Type | CR2450 |
| FCC ID | EZS7347V |
| IC Number | 1513A-7347V |
| Frequency | 434Mhz |
| Range | 1/4-MILE |
| 1-Way or 2-Way | 2-WAY |
Mon-Fri --------------------------- 9am - 5pm
Sat ----------------------------- 10am - 3pm
Sun ----------------------------- Closed
