CAT1MTW

Brand NEW Code Alarm 2-Way 1-Mile Remote Control Transmitter

Original Code Alarm 2-Way, 1-button remote control transmitter for various Code Alarm systems, see list below. Are you looking for a replacement Code Alarm remote control for your system or just need an additional remote control? Buy with confidence from Access 1 Alarm and Audio!.

Will work with the following Code Alarm systems

• CA100
• CA1045
• CA1050
• CA1051
• CA1053
• CA1055
• CA1150
• CA1151
• CA1153
• CA1155
• CA1550
• CA1551
• CA1552
• CA1553
• CA1B
• CA1B5
• CA1BTW
• CA1BTW5
• CA2050
• CA2051
• CA4050
• CA4051
• CA4053
• CA4054
• CA4055
• CA4552
• CA4553
• CA4554
• CA4555
• CA5050
• CA5051
• CA5053
• CA5054
• CA5055
• CA5150
• CA5152
• CA5153
• CA6150
• CA6151
• CA6153
• CA6550
• CA6551
• CA6552
• CA6553

Works with the following Remote Controls:

• CAT1
• CAT1MTW
• CAT4P
• CATX100
• CPL100TX
• CATX50
• TCBTX4
• TCBMT
• TCBMLC
• CATXMT
• CATX1B
• CATX1TW
• CATX4
• CATXMLC

Just because this remote control will work with multiple systems and remote controls, without a 2-way antenna, do NOT expect 2-way confirmation. Yes this is common sense, but has to be stated

Programming:

• Turn the ignition key to the on position.
• Press and HOLD the valet/programming switch. Parking lights will flash 3 times. Release the Button.
• Press the Lock or Start button of each transmitter you want programmed. You will see 1 light flash from each accepted transmitter.
• Turn the ignition switch off.