Replace your old factory Dodge Magnum headlights with new headlight assemblies and HID lighting

Access 1 Alarm & Audio offers a true street legal bolt on performance replacement headlights. Our headlight replacement kit utilizes projector beam headlights that will produce a sharper, more focused beam of light for safer driving at night, the bright Halos and LED lights will make your vehicle more visible to other drivers, and the Halos, LEDs and custom headlight housing will give your ride an exclusive, unique look. Meets all federal regulations for street use. Utilizes 9006 type halogen bulb which is not included or upgrade to HID lighting.

$349.99 Professionally Installed

Upgrade your halogen driving lights to HID's with Access 1 Alarm's premium HID kit! Our kit which utilizes a special circuit designed and engineered in Germany allowing your aftermarket HID lights to work as if they were factory installed. These are not the cheap eBay kits that you see online stating that they work, ours are proven and come with a 1 year warranty parts and labor on the ballasts, should you have any issues.

Unlike the eBay units or the cheap imitations, our system utilize the same chip that the OE manufacturers systems use allowing the vehicles computer to properly work the headlight circuit without throwing a code or shutting down power to the headlights. 

$299.99 Professionally Installed

Save $100 when combining both the headlight assemblies and HID lights

October 1, has officially kicked off the 2015-16 remote start season with the arrival of the wet and cold weather and our phones have not stopped ringing since! Access 1 Alarm & Audio is kicking off the season with new products from Viper with added features to make your new system even more convenient and reliable to use.

So what's new?

Pretty much everything! With the new Viper Systems even the way we integrate the remote start system to your vehicle has changed. With the introduction of Viper's digital solutions no more are we going wire to wire on the newer vehicles. Today we load a digital remote start system up with vehicle specific software and connect it to your vehicles data system which will send the commands from your new remote control, factory remote control or your smartphone to start, lock, unlock, slide open the doors or pop your trunk. Further, Viper released a few vehicle specific T-harnesses that allow for up to 70% of the wires to be now plug and play with factory plugs. We just unplug your factory harness, plug it into the Viper harness and the reinsert the Viper harness into your factory plug location. This ensures a reliable connection that will not come undone and makes for a cleaner looking installation. Your mechanic or dealership will love us!

Read more …

New for Ford Vehicles, these Ghost Shadow valet lights, light the entrance to your vehicle with style.

Displaying the Ford logo on the ground in color when the door is opened.

Access 1 Alarm and Audio utilizes only the best Ghost Shadow lights on the market. Our products use the CREE LED to illuminate the laser etched logo and provide the brightest illumination unlike others from different manufacturers. With a CREE LED your valet lights will last longer and shine longer.

$199 per pair professionally integrated

Read more …

Nissan and Infiniti Touchscreen Garmin Navigation Integration

Add Garmin touchscreen navigation to select Nissan and Infiniti vehicles utilizing the factory color screen.

How does it work?

You initiate the navigation system by touching the new factory touchscreen display which will switch the system from the factory information over to the Garmin navigation system.

Once the navigation appears enter your destination as you would any other navigation system and you are off.

All voice prompts will be through the audio systems front speakers or if you have the Bose Audio system, they will be heard through the center channel.

Want to go back to the factory screen, then simply touch the bottom left corner for 2 seconds and you will be back to the factory.

Want to add backup camera?

Not a problem, this unit will allow you to add any camera you want. It even allows for another video input that can be used for a front camera, FLIR thermal imaging camera, or any video source you want such as Bluray, DVD, iPhone screen, Android Screen, or a gaming system.

So what separates this from other people copying it? Quite simply the utilization of a factory replacement touchscreen. This is a certified Nissan/Infiniti OEM part, there is no overlay added to it, or modifying the existing non touchscreen. the extra mile was taken by the NAVTV design engineers to provide you with the highest quality products.

Watch the video to the right to view the system in use. Navigation system is shown with the optional Live Nav Traffic system activated, which monitors the traffic flow patterns of your route.

Pricing Starts at $1499.99 Professionally Installed

Applications:

Just when you thought your dash had it all, the Alpine X110-SRA raises the bar. With its groundbreaking 10-inch touchscreen, the X110-SLV is truly the largest factory radio replacement for the 2014-up GMC Sierra available, period. Don’t judge the X110-SRA just by its screen, though. The Alpine X110-SLV is packed with new features and controls befitting of its revolutionary size. There’s no doubt the Alpine X110-SRA will make a statement in your GMC Sierra and upgrade your driving experience.

The 10-inch X110-SRA is Alpine engineered specially for the GMC Sierra. The X110-SRA comes with a stunning dash bezel that houses the 10-inch screen and provides a matching fit and finish, as if it came that way from the factory. The rotary volume knob and big crystal buttons for music and navigation sources are backlit to match the Silverado’s factory gauges. Other hard keys provide direct access to the main menu and My Favorites feature.

Read more ...

Just when you thought your dash had it all, the Alpine X110-SLV raises the bar. With its groundbreaking 10-inch touchscreen, the X110-SLV is truly the largest factory radio replacement for the 2014-up Chevrolet Silverado available, period. Don’t judge the X110-SLV just by its screen, though. The Alpine X110-SLV is packed with new features and controls befitting of its revolutionary size. There’s no doubt the Alpine X110-SLV will make a statement in your Chevrolet Silverado and upgrade your driving experience.

The 10-inch X110-SLV is Alpine engineered specially for the Chevrolet Silverado. The X110-SLV comes with a stunning dash bezel that houses the 10-inch screen and provides a matching fit and finish, as if it came that way from the factory. The rotary volume knob and big crystal buttons for music and navigation sources are backlit to match the Silverado’s factory gauges. Other hard keys provide direct access to the main menu and My Favorites feature.

Wherever Life Takes You, You’re Covered

The X110-SLV offers reliable navigation to wherever work or play takes you with preloaded HERE® map data of the United States and Canada, including Alaska, Hawaii, Puerto Rico and the Virgin Islands, which translates to maps galore. With turn-by-turn instructions delivered by Text-to-Speech (TTS) technology, street names, freeway numbers and freeway exit names are announced clearly through your vehicle’s audio system.

Choose from different intuitive map view options, such as 3D mapping, split map, and turn-by-turn arrow view. This unit also features Alpine's exclusive Graphical User Interface with intuitive screen graphics, so it's easy for you to find your way. Thanks to the included free lifetime traffic service, see the congestion ahead of time so you can choose an alternate route. Get quick and easy directions from start to finish.

Before and After

Factory System

Alpine 10" System

Take the Command Center Beyond the Dash

Have you upgraded your Chevrolet Silverado with accessories like a winch, lights, air suspension and a motorized tonneau cover? No need to add switches that clutter your dash. Now you can conveniently control these accessories directly from the X110-SLV’s touchscreen!

The KAC-001 Truck Accessory Controller (sold separately) turns the X110-SLV into a hub to connect and control these accessories. Eight individual outputs are available to control eight relay-connected accessories, and the accessories can be configured as Pulsed, Latched or Momentary Outputs. Graphical icons can be assigned to each accessory for quick identification on the screen.